The Autowatch Ghost Immobiliser
Autowatch Ghost, a revolutionary immobiliser, guards your pride against thieves. The weatherproof, tiny device is hidden within the wiring of your vehicle and is inaccessible to anyone who is looking for it.
The device blocks key cloning and ECU swapping by operating in silence using the CAN data of your vehicle. It won't allow your vehicle to start unless you enter the unique factory-fitted button sequence.
Discreet Design
The Autowatch Ghost immobiliser is discreet and quiet, since it doesn't use radio signals. It is connected directly to your vehicle's CAN network. It makes use of the buttons on your steering wheel or dashboard in order to create an invisible PIN code. This is a far less expensive alternative to alarms, wheel locks or trackers. It will stop thieves from copying your key fob to gain entry into your vehicle.
The device can be easily and conveniently installed into the dashboard or centre console of your vehicle. It can also be hidden with a cover. It does not require LED indicators or key fobs to function, meaning it is not a possibility for thieves to discover its presence. This system is weatherproof and does not have any exposed wiring. It is invulnerable to any attempt to remove or tamper it.
After your Ghost immobiliser has been installed You will receive an encrypted iPhone application that will allow you to control the device. You can turn off the device to allow your car to be driven for valet or service parking. The Ghost will be activated when you enter the PIN again.
As the number of vehicles being taken away has increased and the timeframes for replacements have gotten longer security systems like the Ghost are becoming increasingly important. Its sleek design is ideal for owners of expensive automobiles, who want to keep their car's aesthetics and performance intact while increasing security. The system is certified by Tassa, approved by insurance companies and provides a robust security against key hacking and key copying. It will track the location of your vehicle and send you an alert if it begins moving. This makes it a smart investment, especially in the current economic climate where thieves are targeting in high-value vehicles. ghost 11 immobiliser of the Autowatch ghost is a must to ensure that you do not end up voiding your car warranty.
CAN Bus Communication
The CAN bus is a device that transmits information between electronic devices in your vehicle. It can be used for all sorts of purposes, including monitoring parking sensors and feeding outside proximity information to driver assist systems, such as warnings of lane departure. It can also be used to activate brake by wire systems such as active collision avoidance. It is a very reliable system that operates at high signaling rates over twisted pair cabling, which offers robust noise immunity and fault tolerance.
The Autowatch Ghost immobiliser is connected to the CAN data network of your vehicle and stops key cloning and theft by preventing the engine from running. It operates quietly and doesn't emit any radio frequency signals, making it virtually inaccessible to scanners. Once you've programmed it with a unique pin code, it is not possible to bypass the device by replacing the ECU or using a different key.
It utilizes CAN-bus communication which is a secure method of communication that blocks hacking and interference. CAN buses utilize balanced differential signaling and twist-pair wiring to ensure that messages are transmitted at exactly the same time and that every bit of data is recorded in the same location. This eliminates the need for buffering signals, which is the most common cause of transmission delays and errors. The CAN bus allows error-checking as well, by sending an error message each when an error occurs.
With so many factors contributing to rising car thefts, it's never more crucial to secure your vehicle with an immobiliser. The Autowatch Ghost is a world-class product, and is TASSA approved which means more insurance companies are willing to offer protection to customers who have the device installed in their vehicles.
The installation of the Ghost requires a skilled installer. After installation, the device is completely concealed and can be activated by pressing a set of buttons set on your steering wheel or dashboard. Additionally, you can make use of an emergency pin code-override card which will be supplied to you at the time of installation to disable the immobiliser in the event you forget your PIN code.
No Radio Frequency Signals
The Ghost immobiliser is different from other immobilisers in that it does not rely on key fobs to be activated and there aren't any LED indicators on your vehicle which will show its location. It is based on your car's CAN data circuit and is completely silent, so thieves won't even be aware it's there. This makes it difficult to spot and is a major obstacle to thieves who want to steal your vehicle.
The Ghost is a state-of-the-art immobiliser that shields vehicles from key cloning, hacking and key theft. It is connected to the engine controller unit via CAN, which makes it difficult for thieves to remove or disable. It is also tamperproof and activates by entering a personal pin code that you can alter at any time.
This will ensure that when you have to leave your vehicle in the garage you are able to drive it. No one else can access the vehicle and drive it. This feature is very useful when you need to do some shopping or pick up an order, or go to the bank. This feature can also be a good protection against those who would like to break into your car and take your possessions.
One of the reasons that Ghost is such a deterrent is that thieves will not know what to do to start your vehicle. This is because it does not rely on conventional methods of security such as wheel locks and cutting wires and wires, but rather a distinct method that requires your personal PIN to be entered in order to allow you to drive the vehicle.
In addition to this in addition, the Ghost can also be set to service mode, preventing your vehicle from being started until you enter the PIN again. This is perfect when you're on an extended trip, such as an excursion or business trip. When you enter the PIN a second time, you can easily re-program the device back to its original mode.
These features make the Autowatch Ghost the most effective aftermarket CAN bus immobiliser on the market. It is silent, discreet and unnoticeable by a potential criminal. It safeguards your vehicle against cloning or hacking, and can help you cut down on insurance premiums. It is a top-rated product that has been tested independently by TASSA. This gives car owners peace-of-mind and the confidence that they can keep their prized possession exactly where it belongs, in their driveway.
Easy Installation
The Ghost Immobiliser, a cutting-edge new security system that protects vehicles from key hacking and copying. It connects directly to the vehicle's CAN data network. It utilizes buttons already on the steering wheel and dashboard to generate a pin code sequence that has to be entered to begin the engine. This assures that your vehicle will be only used by the people you permit. It is also Tassa Certified and Insurance Approved, making it the perfect solution for modern vehicles that do not have an immobiliser from the factory.
The installation process is straightforward and can be completed in just a few hours. The first step is to identify the power wire that connects the battery to Ghost Immobiliser. It is recommended that the wire is insulated with heat shrink tubing to avoid short circuits. Make sure the wire is connected to an ignition or any other source of constant 12V.
Use cable ties to connect and secure the connection once you have identified it. Install an appropriate fuse tap to protect the connections from power surges. Finally connect the Ghost immobiliser to a grounding location on the chassis of your vehicle.
Once installed, the Ghost Immobiliser will not be detected by thieves because it doesn't emit radio waves and does not need LED indicators. It is also silent so that criminals cannot hear it working and are unable to disable it. It also is tamperproof because it requires a unique pin code which is only entered by the driver.
The Service/Valet Mode comes with an emergency override if you are worried that you may forget your PIN code or a button that you use is not working. This allows you to temporarily disable the Ghost immobiliser to facilitate maintenance or valet parking.
The Autowatch Ghost immobiliser is easy to use and offers a convenient alternative to traditional keyfobs. Connect your iPhone to the device and it will determine your car's position and give you a list of nearby places. The app can be used to track your vehicle and track its location in the event that it is stolen or relocated from a specific area. Its security features and ease of use make it a popular choice among drivers.